Source: questions are reproduced from UPSC Civil Services papers;
answers and explanations are written by upscnest and are not official UPSC keys — see the
disclaimer.
In the context of solving pollution problems, what is/are the advantage/advantages of bioremediation technique? [2017/A-14] 1. It is a technique for cleaning up pollution by enhancing the same biodegradation process that occurs in nature. 2. Any contaminant with heavy metals such as cadmium and lead can be readily and completely treated by bioremediation using microorganisms. 3. Genetic engineering can be used to create microorganisms specifically designed for bioremediation. Select the correct answer using the code given below:
UPSC CSE 2017 · Prelims · GS Paper I
A1 only
B2 and 3 only
C1 and 3 only
D1, 2 and 3
Medium
Correct answer: C. 1 and 3 only
Statements 1 and 3 are correct. Bioremediation harnesses and speeds up the natural microbial breakdown of pollutants, and genetic engineering can produce microorganisms designed for particular contaminants. Statement 2 is wrong because heavy metals such as cadmium and lead are not biodegraded; they can only be immobilised or accumulated, and treatment is rarely complete.
In the cities of our country, which among the following atmospheric gases are normally considered in calculating the value of the Air Quality Index? [2016/A-86] 5. Methane Select the correct answer using the code given below.
The National Air Quality Index is computed from carbon monoxide, nitrogen dioxide, sulphur dioxide, ozone, PM2.5, PM10 and ammonia, so items 2, 3 and 4 are correct. Carbon dioxide and methane are greenhouse gases tracked for climate purposes but are not part of the AQI calculation.
With reference to ‘fly ash’ produced by the power plants using the coal as fuel, which of the following statements is/are correct? [2015/A-18] 1. Fly ash can be used in the production of bricks for building construction 2. Fly ash can be used as a replacement for some of the Portland cement contents of concrete 3. Fly ash is made up of silicon dioxide and calcium oxide only, and does not contain any toxic elements. Select the correct answer using the code given below
UPSC CSE 2015 · Prelims · GS Paper I
A1 and 2
B2 only
C1 and 3
D3 only
Medium
Correct answer: A. 1 and 2
Statements 1 and 2 are correct. Fly ash is used to make bricks and blocks and also acts as a pozzolanic partial replacement for Portland cement in concrete. Statement 3 is wrong because fly ash contains silica, alumina and calcium oxide along with toxic elements such as arsenic, lead and mercury.
With reference to bio-toilets used by the Indian Railways, consider the following statements: [2015/A-93] 1. The decomposition of human waste in the bio-toilets is initiated by a fungal inoculum. 2. Ammonia and water vapour are the only end products in this decomposition which are released into the atmosphere. Which of the statements given above is/are correct?
UPSC CSE 2015 · Prelims · GS Paper I
A1 only
B2 only
CBoth 1 and 2
DNeither 1 nor 2
Medium
Correct answer: D. Neither 1 nor 2
Neither statement is correct. Bio-toilets use a bacterial inoculum, not a fungal one, which digests human waste in an anaerobic environment. The end products include methane, carbon dioxide, water and a small residue besides ammonia, so it is wrong to say that ammonia and water vapour are the only products released.
There is some concern regarding the nanoparticles of some chemical elements that are used by the industry in the manufacture of various products. Why? [2014/A-98] 1. They can accumulate in the environment and contaminate water and soil. 2. They can enter the food chains. 3. They can trigger the production of free radicals. Select the correct answer using the code given below.
UPSC CSE 2014 · Prelims · GS Paper I
A1 and 2 only
B3 only
C1 and 3 only
D1, 2 and 3
Medium
Correct answer: D. 1, 2 and 3
All three statements are correct. Nanoparticles can persist and accumulate in soil and water, be taken up by organisms and move along food chains, and their high surface reactivity can generate free radicals that damage cells. Hence every reason listed is a valid ground for concern.
Brominated flame retardants are used in many household products like mattresses and upholstery. Why is there some concern about their use? [2014/A-16] 1. They are highly resistant to degradation in the environment. 2. They are able to accumulate in humans and animals. Select the correct answer using the code given below.
UPSC CSE 2014 · Prelims · GS Paper I
A1 only
B2 only
CBoth 1 and 2
DNeither 1 nor 2
Medium
Correct answer: C. Both 1 and 2
Both statements are correct. Brominated flame retardants resist degradation in the environment and, being fat-soluble, accumulate in the tissues of animals and humans, with concern about thyroid, neurological and developmental effects. Persistence together with bioaccumulation is the basis of the concern about these chemicals.
Which of the following are some important pollutants released by the steel industry in India? [2014/A-24] Select the correct answer using the code given below.
1. Oxides of sulphur | 2. Oxides of nitrogen 3. Carbon monoxide | 4. Carbon dioxide
UPSC CSE 2014 · Prelims · GS Paper I
A1, 3 and 4 only
B2 and 3 only
C1 and 4 only
D1, 2, 3 and 4
Medium
Correct answer: D. 1, 2, 3 and 4
All four are important pollutants of the steel industry, so the answer includes every item. Sintering, coke ovens, blast furnaces and captive power generation in steel plants release sulphur oxides, nitrogen oxides and carbon monoxide, besides large volumes of carbon dioxide and particulate matter.
Which of the following can be found as pollutants in the drinking water in some parts of India? [2013/A-8] Select the correct answer using the codes given below.
Arsenic, fluoride and uranium contaminate drinking water in parts of India, so items 1, 3 and 5 are correct. Arsenic is a problem in parts of West Bengal and Bihar, fluoride in Rajasthan and Gujarat, and uranium in some aquifers of Punjab and Rajasthan. Sorbitol is a sugar alcohol used as a food additive, and formaldehyde is not a recognised drinking-water pollutant of this kind.
Photochemical smog is a resultant of the reaction among?
UPSC CSE 2013 · Prelims · GS Paper I
ANO2, O3 and peroxyacetyl nitrate in the presence of sunlight
BCO, O2 and peroxyacetyl nitrate in the presence of sunlight
CCO, CO2 and NO2 at low temperature
DHigh concentration of NO2, O3 and CO in the evening
Medium
Correct answer: A. NO2, O3 and peroxyacetyl nitrate in the presence of sunlight
Photochemical smog results from reactions among nitrogen dioxide, ozone and peroxyacetyl nitrate in the presence of sunlight. Sunlight drives the reactions between nitrogen oxides and volatile organic compounds, producing ozone and PAN. Carbon monoxide and low-temperature or evening conditions do not describe photochemical smog formation.
Acid rain is caused by the pollution of the environment by?
UPSC CSE 2013 · Prelims · GS Paper I
ACarbon dioxide and nitrogen
BCarbon monoxide and carbon dioxide
COzone and carbon dioxide
DNitrous oxide and sulphur dioxide
Medium
Correct answer: D. Nitrous oxide and sulphur dioxide
Acid rain is caused by pollution from nitrous oxide and sulphur dioxide. These gases react with water vapour and oxygen in the atmosphere to form nitric acid and sulphuric acid, which fall as acid rain. Carbon dioxide, carbon monoxide and ozone are not the main acid-rain precursors.
Due to improper / indiscriminate disposal of old and used computers or their parts, which of the following are released into the environment as e-waste? [2013/A-29] 7. Plutonium Select the correct answer using the codes given below.
Beryllium, cadmium, chromium, mercury and lead are found in computer components and are released as e-waste, giving items 1, 2, 3, 5 and 6. Heptachlor is an organochlorine insecticide and plutonium is a radioactive element used in nuclear material, so neither is a component of discarded computers.
Lead, ingested or inhaled, is a health hazard. After the addition of lead to petrol has been banned, what still are the sources of lead poisoning? [2012/A-15] Select the correct answer using the codes given below:
1. Smelting units | 2. Pens and pencils 3. Paints | 4. Hair oils and cosmetics
UPSC CSE 2012 · Prelims · GS Paper I
A1,2 & 3 only
B1 and 3 only
C2 & 4 only
D1,2,3 & 4
Medium
Correct answer: B. 1 and 3 only
Smelting units and paints remain sources of lead exposure, so items 1 and 3 are correct. Pencil cores are made of graphite and clay, not the metal lead, and hair oils and cosmetics are not established lead sources in the Indian context, so the codes including 2 or 4 are wrong.
Consider the following: [2011/A-2] 1. Carbon dioxide 2. Oxides of nitrogen 3. Oxides of Sulphur Which of the above is/are the emission/emissions from coal combustion at thermal power plants?
UPSC CSE 2011 · Prelims · GS Paper I
A1 only
B2 and 3 only
C1 and 3 only
D1,2, and 3
Medium
Correct answer: D. 1,2, and 3
All three are emitted. Burning coal in thermal power plants produces carbon dioxide from the carbon in coal, while the sulphur and nitrogen in coal are oxidised to sulphur oxides and nitrogen oxides. Hence the answer includes all three gases listed.
There is a concern over the increase in harmful algal blooms in the seawater of India. What could be the causative factors for this phenomenon? [2011/A-47] 1. Discharge of nutrients from the estuaries. 2. Run-off from the land during the monsoon. 3. Upwelling in the seas. Select the correct answer from the codes given below:
UPSC CSE 2011 · Prelims · GS Paper I
A1 only
B1 and 2 only
C2 and 3 only
D1,2, and 3
Medium
Correct answer: D. 1,2, and 3
All three factors are correct. Harmful algal blooms are driven by excess nutrients, so nutrient discharge from estuaries, nutrient-laden runoff during the monsoon and nutrient-rich upwelled water all promote bloom formation. Together they explain the increase in such blooms in Indian coastal waters.
Which bacterial strain, developed from natural isolates by genetic manipulations, can be used for treating oil spills?
UPSC CSE 2010 · Prelims · GS Paper I
AAgrobacterium
BClostridium
CNitrosomonas
DPseudomonas
Medium
Correct answer: D. Pseudomonas
Pseudomonas is the bacterial strain developed from natural isolates by genetic manipulation for treating oil spills. Certain Pseudomonas species degrade hydrocarbons, and engineered strains have been used in bioremediation of oil-contaminated soil and water. Agrobacterium, Clostridium and Nitrosomonas are important bacteria but are not used for this purpose.
Indiscriminate disposal of used fluorescent electric lamps causes mercury pollution in the environment. Why is mercury used in the manufacture of these lamps?
UPSC CSE 2010 · Prelims · GS Paper I
AA mercury coating on the inside of the lamp makes the light bright white.
BWhen the lamp is switched on, the mercury in the lamp causes the emission of ultra-violet radiations.
CWhen the lamp is switched on, it is the mercury which converts the ultra – violet energy into visible light.
DNone of the statements given above is correct about the use of mercury in the manufacture of fluorescent lamps.
Medium
Correct answer: B. When the lamp is switched on, the mercury in the lamp causes the emission of ultra-violet radiations.
Mercury is used in fluorescent lamps because, when the lamp is switched on, the mercury vapour emits ultraviolet radiation. This UV light strikes the phosphor coating on the inside of the tube, which converts it into visible light. The mercury itself is not the white coating and does not convert UV into visible light; that is the job of the phosphor.
Which one of the following is produced during the formation of photochemical smog?
UPSC CSE 2003 · Prelims · GS Paper I
AHydrocarbons
BNitrogen Oxides
COzone
DMethane
Medium
Correct answer: C. Ozone
Ozone is produced during photochemical smog formation, when nitrogen oxides and hydrocarbons react in sunlight and generate ozone as a secondary pollutant. Nitrogen oxides and hydrocarbons are the precursors rather than the products, and methane is not the characteristic product of this reaction.
Assertion (A): Coal-based thermal power stations contribute to acid-rain. [2003] Reason (R): Oxides of carbon are emitted when the coal burns.
UPSC CSE 2003 · Prelims · GS Paper I
ABoth A and R are individually true and R is the correct explanation of A
BBoth A and R are individually true but R is NOT the correct explanation of A
CA is true but R is false
DA is false but R is true
Medium
Correct answer: B. Both A and R are individually true but R is NOT the correct explanation of A
Both the assertion and the reason are true, but the reason is not the explanation. Coal-based power stations do contribute to acid rain, chiefly through emissions of sulphur dioxide and oxides of nitrogen. They also emit oxides of carbon, but carbon dioxide and carbon monoxide do not form acid rain, so the reason is separate from the assertion.
The water pollution in river is measured by the dissolved amount of:
UPSC CSE 1998 · Prelims · GS Paper I
AChlorine
BOzone
CNitrogen
DOxygen
Medium
Correct answer: D. Oxygen
River pollution is commonly judged from the amount of dissolved oxygen in the water, since organic wastes are broken down by oxygen-consuming bacteria and polluted stretches therefore carry less dissolved oxygen. Chlorine, ozone and nitrogen are not the standard indicators used for this measurement.
Which one of the following fuels causes minimum environmental pollution?
UPSC CSE 1995 · Prelims · GS Paper I
ADiesel
BCoal
CHydrogen
DKerosene
Medium
Correct answer: C. Hydrogen
Hydrogen burns to give only water vapour and heat, so it causes the least pollution at the point of use, provided it is produced cleanly. Diesel, coal and kerosene are carbon-based fuels that release particulates, sulphur dioxide and carbon dioxide.